Installing / Replacing A Primergy Cx122 S1 Server; Removing A Primergy Cx122 S1 Server - Fujitsu PRIMERGY CX122 S1 Operating Manual

4.2 Installing / replacing a PRIMERGY CX122
S1 server
V
CAUTION!
Follow the safety instructions in the chapter
page 17.
4.2.1

Removing a PRIMERGY CX122 S1 server

I
A defective PRIMERGY CX122 S1 server is maintained by Fujitsu
service technicians. The warranty is void if the server is damaged during
installation or replacement of system expansions.
Ê Shut down the server.
For information on controls and indicators, please refer to
panel" on page
Figure 2: Removing all cables from the front side of the server
Ê Disconnect all cables from the server.
I
Cable guides ensure that the network cables remain located at their
designated height units when unplugged.
CX122 S1

Installing / replacing a PRIMERGY CX122 S1 server

41.
Operating Manual
"Important information" on
section "Front
27