Opening The Blade Server Cover - IBM LS42 - BladeCenter - 7902 Installation And User Manual

Opening the blade server cover

The following illustration show how to open the cover on a blade server. The
procedure for opening the cover on an MPE or expansion unit is the same.
To open the blade server cover, complete the following steps:
1. Read the safety information that begins on page "Safety" on page v and
2. If the blade server is installed in a BladeCenter unit, remove it (see "Removing
3. Carefully lay the blade server down on a flat, static-protective surface, with the
4. Press the blade-cover release on each side of the blade server and lift the
5. Lay the cover flat, or lift it from the blade server and store for future use.
20
BladeCenter LS22 and LS42 Type 7901 and 7902: Installation and User's Guide
"Installation guidelines" on page 17.
the blade server from the BladeCenter unit" on page 19 for instructions).
cover side up.
cover open, as shown in the illustration.