Hot-Plug Scsi Hard Drive Options - HP ProLiant DL385 User Manual

64 HP ProLiant DL385 Server User Guide
5. Install the DIMM.
6. Install the access panel ("Installing the access panel" on page 39).

Hot-plug SCSI hard drive options

When adding SCSI hard drives to the server, observe the following general
guidelines:
•
A maximum of 14 SCSI devices per channel can be added.
•
Each SCSI drive must have a unique ID. The system automatically sets all
SCSI IDs.
•
The SCSI ID for each hot-plug hard drive is set automatically to the next
sequential ID number in a series beginning with ID0.
•
If only one SCSI hard drive is used, install it in the bay with the lowest
number.
•
Hot-plug hard drives must be either Wide Ultra2, Ultra3, or Ultra320 SCSI
types. Mixing these types with other drive standards degrades the overall
performance of the drive subsystem.
•
Drives must be the same capacity to provide the greatest storage space
efficiency when drives are grouped together into the same drive array.