IMPORTANT: Always install a PPM when you install a processor. The system fails to boot if the
corresponding PPM is missing.
NOTE: The appearance of compatible PPMs may vary.
Reinstall the PPM retaining bracket.
13.
Reinstall the processor air baffle.
14.
Reinstall the access panel
15.
Hot-plug SCSI hard drive options
When adding SCSI hard drives to the server, observe the following general guidelines:
•
Hot-plug hard drives must be Ultra320 SCSI drives for optimum performance. Mixing Ultra320 SCSI
drives other drive types degrades the overall performance of the drive subsystem.
•
When drives are groups together into the same drives array, drives must be the same capacity to
provide the greatest storage space efficiency.
Installing hot-plug SCSI hard drives
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
("Access
panel" on page 31).
Hardware options installation 44