HP ProLiant DL385 User Manual page 54

54 HP ProLiant DL385 Server User Guide
Item
11
12
4. Connect the power cord to the back of the server.
5. If you chose not to install the cable management arm, install the power cord
anchor to the server.
6. Secure cables to the cable management arm.
Description
USB connectors (2)
Video connector
NOTE: Peripheral device cables are removed for clarity.
NOTE: If using the power cord anchor, be sure to leave enough slack
in the power cord so that the redundant power supply can be removed
without disconnecting the power cord from the primary power supply.
Connector
Color
Black
Blue