Hot-Plug Scsi Hard Drive Options - HP DL560 - ProLiant - 1 GB RAM User Manual

62 HP ProLiant DL560 Server User Guide

Hot-Plug SCSI Hard Drive Options

When adding SCSI hard drives to the server, observe the following general
guidelines:
•
•
•
•
•
Refer to "Front Panel Components (on page 8)" for the server SCSI ID
assignments.
A maximum of two SCSI devices can be added.
The system automatically sets all SCSI IDs.
If only one SCSI hard drive is used, install it in the bay with the lowest SCSI
ID number.
Hot-plug hard drives must be either Wide Ultra2, Ultra3, or Ultra4 SCSI
types. Mixing these types with other drive standards degrades the overall
performance of the drive subsystem.
Drives must be the same capacity to provide the greatest storage space
efficiency when drives are grouped together into the same drive array.