D Receiving A Polling Request Call - Icom IC-M504A Instruction Manual

6
DSC OPERATION
■ Receiving DSC calls (Continued)
D Receiving a Position Report Call
When a Position Report Call is received:
➥ The beeps sound.
➥ "Received POS Report" appears on the display.
➥ " " and the LCD backlight blink.
➥ Push [CLR] to stop the beeps and the backlight blinking,
then push [DIAL•ENTER] to display the position informa-
tion, or push [CLR] to exit the screen.
• If the received call requires a reply, push [DIAL•ENTER] to send
a reply to the call. After sending, push [DIAL•ENTER] to display
the position information, or push [CLR] to exit the screen.
• " " continues to blink.
Received
POS Report
<Paul
<CLR ˘
Beep Off>

D Receiving a Polling Request call

When a Polling Request call is received:
➥ The beeps sound.
➥ "Received POLL REQ" appears on the display.
➥ " " and the LCD backlight blink.
➥ Push [CLR] to stop the beeps and the backlight blinking,
then push [DIAL•ENTER] to reply to the call; push [CLR]
to ignore the call.
• " " continues to blink.
40
25W INT
TAG
SAFETY
25W
TAG
Received
POLL REQ
<Paul
<CLR ˘
Beep Off>
D Receiving a Position Reply Call
When a Position Reply call is received:
➥ The beeps sound.
➥ "Received POS Reply" appears on the display.
➥ " " and the LCD backlight blink.
➥ Push [CLR] to stop the beeps and the backlight blinking,
then push [DIAL•ENTER] to display the position informa-
tion; push [CLR] to exit the screen.
• " " continues to blink.
25W
TAG
Received
POS Reply
<Paul
<CLR ˘
Beep Off>
INT
SAFETY
INT
SAFETY