Icom IC-M504A Instruction Manual page 30

6
DSC OPERATION
■ Transmitting DSC calls
D Transmitting an individual call (Continued)
About Manual Inputting:
Rotate [DIAL] to input the 9 digit individual ID, then push
[DIAL•ENTER].
• Push [16•9] to move the cursor forward, or [CH/WX•DUAL•U/
I/C] to move it backward.
• Push [CLR] to cancel and return to the DSC Set up menu.
• The first digit is specified as '0' for a Group ID.
• The first two digits are '0' for any Coast station ID.
Input Address
Input 9 digits
_________
<CLR ˘ Exit / ENT ˘ OK>
24
--DSC Menu--
e Rotate [DIAL] to select a desired intership channel or
"Manual Input," then push [DIAL•ENTER].
• Intership channels are already preset into the transceiver in the
recommended order.
• After pushing [DIAL•ENTER], "Individual Call Ready"
is displayed.
--DSC Menu--
Select Intership CH
˘08
69
77
06
<CLR ˘ Exit / ENT ˘ OK>
r Push [DIAL•ENTER] to transmit the Individual Call.
• Emergency channel (Channel 70) is automatically selected.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
t Standby on Channel 70 until an acknowledgement is re-
ceived.
--DSC Menu--
Individual Call
TX Complete
Now Waiting for ACK
<CLR ˘ Exit>
--DSC Menu--
Individual Call Ready
<CLR ˘ Exit / ENT ˘ OK>