Dsc Set Up Menu; D Other Messages - Icom IC-M504A Instruction Manual

6
DSC OPERATION
■ Received messages (Continued)

D Other messages

q Enter "Other" in the DSC menu.
• The messages are stored in "Other," if its format specifier is
other than 'Distress.'
➪
DSC Menu Received Call Log
(Push [MENU])
w Rotate [DIAL] to select the desired message, then push
[DIAL•ENTER].
• Blinking messages have not been read.
Select Message
-Individual Call
˘Individual Call
Group Call
Position Replay
All Ships Call
<CLR ˘ Exit / ENT ˘ OK>
e Rotate [DIAL] to scroll the message contents.
• The stored message has various information, depending on the
DSC call type.
r Push [CLR] to exit, or hold down [CLR] for 1 second to de-
lete the displayed message and return to the DSC menu.
t Push [CLR], or rotate [DIAL] to select "Exit" then push
[DIAL•ENTER], to return to the normal operating mode.
44
➪
Other
(Rotate [DIAL], then push [DIAL•ENTER].)
--DSC Menu--

■ DSC Set up menu

D Add Individual ID/Group ID
D Delete Individual ID/Group ID
D Offset time
This item sets the offset time from the UTC (Universal Time
Coordinated) time.
q Enter "Offset Time" in the DSC Set up menu.
➪
DSC Menu Set up
(Push [MENU]) (Rotate [DIAL], then push [DIAL•ENTER].)
w Rotate [DIAL] to edit the offset time from the UTC (Univer-
sal Time Coordinated) time.
• Push [16•9] to move the cursor forward, or [CH/WX•DUAL•U/
I/C] to move it backward.
• Push [CLR] to cancel and return to the DSC Set up menu.
--DSC Menu--
Input Offset Time
00:00
<CLR˘Exit / ENT ˘ OK>
No offset time (default)
e After editing, push [DIAL•ENTER] to program.
r Push [CLR], or rotate [DIAL] to select "Exit" then push
[DIAL•ENTER], to return to the DSC menu.
• Repeat step r again to return to the normal operating mode.
(See pages 16, 17)
(See pages 16, 17)
➪
Offset Time
--DSC Menu--
Input Offset Time
+12:00
<CLR˘Exit / ENT ˘ OK>
+12 hours