Dsc Address Id - Icom IC-M504A Instruction Manual

6
DSC OPERATION

■ DSC address ID

A total of 100 DSC address IDs can be programmed and
named with up to 10 characters.
D Programming Individual ID
q Enter "Add:INDV ID" in the DSC Set up menu.
DSC Menu
(Push [MENU])
w Rotate [DIAL] to input the individual ID and ID name.
• Push [16•9] to move the cursor forward, or [CH/WX•DUAL•U/
I/C] to move it backward.
• Push [CLR] to cancel and return to the DSC Set up menu.
• "Full ID" appears when 100 DSC address IDs are already set.
• After inputting the 9 digit code, push [DIAL•ENTER] or [16•9] to
edit the ID name.
The first digit is specified as '0' for a Group ID.
The first two digits are '0' for any Coast station ID.
Add:Individual ID
Input 9 digits
_________
Input name
_________
<CLR ˘ Exit / ENT ˘ OK>
e After inputting the ID name, push [DIAL•ENTER] to program.
r Push [CLR], or rotate [DIAL] to select "Exit" then push
[DIAL•ENTER], to return to the DSC menu.
• Repeat step r again to return to the normal operating mode.
16
➪ ➪
Set up Add:INDV ID
(Rotate [DIAL], then push [DIAL•ENTER].)
--DSC Menu--
D Deleting Individual ID
q Enter "DEL:INDV ID" in the DSC Set up menu.
➪
DSC Menu Set up
(Push [MENU]) (Rotate [DIAL], then push [DIAL•ENTER].)
• When no address ID is programmed, "No ID" is displayed. In
this case, push [CLR] to exit.
w Rotate [DIAL] to select the desired ID name to delete.
--DSC Menu--
Select ID
John
Paul
˘George
Michael
<CLR ˘ Exit / ENT ˘ OK>
e Push [DIAL•ENTER] to delete the selected individual ID
and return to the DSC Set up menu.
r Push [CLR], or rotate [DIAL] to select "Exit" then push
[DIAL•ENTER], to return to the DSC menu.
• Repeat step r again to return to the normal operating mode.
➪
DEL:INDV ID