Table of Contents
Advertisement
Viewing Product and Fabric Data
■
■
■
■
Note:
management style parameter of the HAFM interface. The S/390 mode used for the
EWS interface is equivalent to the FICON management style on the HAFM. The EWS
term Open Systems mode is equivalent to Open Systems management style for the
HAFM.
■
Viewing Fabric Information
Options on the View panel of the EWS interface enable you to see information
about the fabric in which a product participates. You can view each of the
following:
■
■
■
82
Insistent Domain ID — Indicates whether the domain ID is enabled to be
insistent. This option is required if Enterprise Fabric Mode (an optional
SANtegrity Binding feature) is enabled.
Rerouting Delay — Indicates whether rerouting delay is enabled. Enabling
the rerouting delay ensures that frames are delivered in order through the
fabric to their destination.
Domain RSCNs — Domain Register For State Change Notifications (domain
RSCNs) are sent between end devices in a fabric to provide additional
connection information to host bus adapters (HBA) and storage devices. This
option is required if Enterprise Fabric mode (an optional SANtegrity feature)
is enabled.
Operating Mode — Indicates whether the operation mode is S/390 mode or
Open Systems mode. (S/390 mode is not supported with the
Edge Switch 2/24.)
The operation mode parameter of the EWS interface is equivalent to the
Director Speed — speed of communications on the product. Values can be
1 Gbps or 2 Gbps. Valid on the Director 2/64 only.
Operating parameters for a fabric.
Information about each of the devices that make up the fabric.
Topology of the fabric.
Embedded Web Server User Guide
Advertisement
Table of Contents
