Modify Zone Tab View - HP AA-RTDRB-TE User Manual

4. Type the zone name and click Add New Zone. After the name is validated,
5. To add devices (members) to the zone, click the zone name (Zone-1). The
Figure 21: Modify Zone tab view
Embedded Web Server User Guide
the new zone name (Zone-1) and an associated Delete button display at the
bottom of the page. Note the following:
■ Save and activate the zone — Changes to a zone or zoning configuration
are not saved and activated on the product until saved as part of a zone set.
See "Configuring Zone
performing this function.
■ Delete all zones — To delete all configured zones and zone members,
click Delete All Zones. A confirmation dialog box displays. Click OK to
delete all zones.
■ Delete a single zone — To delete a single zone and its zone members,
click the Delete button adjacent to the zone name. A confirmation dialog
box displays. Click OK to delete the zone.
■ Display more zones — If a zone set contains more than 64 zones, the
Display More Zones link activates to display subsequent pages. In
addition, the Display Previous Zones link activates on subsequent
displayed pages.
Modify Zone tab view displays
Sets" on page 69 for information about
(Figure 21).
Configuring Zones
67