HP AA-RTDRB-TE User Manual page 37

Note:
management style parameter in the HAFM interface. The S/390 mode used for the
EWS interface is equivalent to the FICON management style in the HAFM.
4. Click Activate to save and activate the changes. The following message
5. Set the product online as follows:
Embedded Web Server User Guide
The operation mode parameter in the EWS interface is equivalent to the
This setting only affects the mode used to manage the product; it does not
affect port operation. Available selections are:
— Homogenous Fabric — Choose this option if the product is
fabric-attached only to other HP directors or switches operating in
Homogenous Fabric mode.
— Open Fabric 1.0 — Choose this option for managing heterogeneous
fabrics and if the product is fabric-attached to HP directors or
switches and open-fabric compliant switches produced by other
original equipment manufacturers (OEMs).
displays: Your changes to the fabric parameters
configuration have been successfully activated.
a. Choose Operations from the navigation panel. The Operations page
opens.
b. Click the Online State tab, then click Set Online. The following message
displays: Your operations changes have been
successfully activated.
Configuring the Product
37