Enabling Or Disabling The Cli; Disabling The Cli - HP AA-RTDRB-TE User Manual

Configuring the Product

Enabling or Disabling the CLI

Perform this procedure to enable or disable the state of the product's command
line interface (CLI). To change the CLI state:
1. Choose Configure from the navigation panel.
2. Click the Management tab and the CLI tab. The CLI tab view displays
Figure 12: Disabling the CLI
3. Perform one of the following steps as required:
42
(Figure 12).
a. Click Enable to activate the CLI. The following message displays: Your
changes to the CLI enable state have been
successfully activated.
b. Click Disable to deactivate the CLI. The following message displays:
Your changes to the CLI enable state have been
successfully activated.
Embedded Web Server User Guide