Table of Contents
Advertisement
Configuring the Product
Note:
32. To configure all of the ports, make sure you go through each set. You must click
Activate for each view before moving to the next.
To configure Open Trunking:
1. Choose Configure from the navigation panel.
2. Choose the Performance tab and the Open Trunking tab. The Open
Figure 16: Configuring Open Trunking
3. Choose Enabled in the Open Trunking State drop down list.
4. Choose Enabled or Disabled from the Unresolved Congestion Event
50
For the Director 2/140, ports are displayed through several pages in groups of
Trunking tab view displays
Notification drop down list. If enabled, an unresolved congestion entry is
made in the event log and, if SNMP is configured, an SNMP trap is generated.
Unresolved congestion occurs when a flow cannot be rerouted to another link
because it would exceed the other link's threshold.
(Figure
16).
Embedded Web Server User Guide
Advertisement
Table of Contents
