Table of Contents
Advertisement
Error Messages
Table 9: Embedded Web Serve Messages (Continued)
Error 228: Invalid Write
Authorization Argument
Error 229: Invalid UDP
Port Number
Error 230: Invalid WWN
Error 231: Invalid Port
number
Error 232: Invalid Domain
ID
Error 233: Invalid
Member
Error 234: Invalid
Command
134
Message
The write authorization
parameter does not
contain a valid value.
The udpPortNum
parameter does not
contain a valid value.
The wwn parameter does
not contain a valid value.
The portNum parameter
does not contain a valid
value.
The domainID parameter
does not contain a valid
value.
The zone member added
is not valid.
The system cannot
associate an action with
the submitted command.
The command may be
misspelled, required
parameters may be
missing, or the request
may not be applicable.
Description
Embedded Web Server User Guide
Action
Parameters must be typed
exactly to specification to
be recognized correctly.
Parameters must be typed
exactly to specification to
be recognized correctly
by the system.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
For the appropriate
parameters, see the
section of the manual that
corresponds to the
attempted command.
Consult the
documentation for the
command to be sure this
command was entered
correctly, all parameters
are valid and present,
and that the syntax is
correct.
Advertisement
Table of Contents
