Holding And Resuming Conferences; To Place A Conference Call On Hold; Splitting Conferences; To Split A Conference - Polycom IP5000 Owner's Manual

Holding and Resuming Conferences

When you place a conference call on hold, you place all other
conference participants on hold.

To place a conference call on hold:

From the Active: Conference screen, press the Hold soft key. The
Hold: Conference screen displays. The other parties in the
conference call are put on hold.
From the Hold: Conference screen, you can do the following:
• To resume the conference call, press the Resume soft key.
The Active: Conference screen will display again.
To place a call to a new party, press the New Call soft key.
•
The conference remains on hold, and the new call be-
comes the active call.
To end the conference call and split the conference into two
•
separate calls on hold, press the Split soft key.

Splitting Conferences

When a conference has been established, a Split soft
is available. When you split a conference, you end the conference
and put all parties on hold.

To split a conference:

From the Active: Conference screen, press the Split soft key. The
conference ends, and all calls are split into individual calls and put
on hold.

Ending Conferences

You can end a conference, and your connection to the other
parties, by pressing the End Call soft key. When you use the
End Call soft key, the other parties remain connected.

To end a conference:

From the Active: Conference screen, press the End Call soft key.
T he two other parties remain connected.
33
key