To Set Up A Local Conference Call; To Join Two Calls In A Conference; During The Conference Call, You Can Do The Following; Network Conference - Yealink SIP-T42G User Manual

User Guide for the SIP-T42G IP Phone
The SIP-T42G IP phone supports up to 3 parties (including yourself) in a conference call.
This is the default method of conference called Local Conference.

To set up a local conference call:

1. Place a call to the first party.
2. When the first party answers the call, press the Conf soft key to place a new call.
The active call is placed on hold.
3. Enter the number of the second party and press
4. When the second party answers the call, press the Conf soft key again to join all
parties in the conference.

To join two calls in a conference:

1. Place two calls using two different accounts on the phone (for example, place the
first call using account 1, and then place the second call using account 2).
2. Press
(for example, select the call on account 1).
3. Press the Conf soft key to join the two calls in the conference on account 1.

During the conference call, you can do the following:

Press the Hold soft key to place the conference on hold.
-
Press the Split soft key to split the conference call into two individual calls.
-
Press the Manage soft key, and then press
-
Press the Far Mute soft key to forbid the party from speaking.
-
Press the Remove soft key to remove the party from the conference call.
-
Press the New Call soft key to place a new call.
-
Press the Back soft key to return to the previous interface.
-
Press
-
Press the Cancel soft key to drop the conference call.
-
You can use network conference on the SIP-T42G IP phone to conduct a conference with
multiple participants.
88
or to select the call for conference and make sure the call is active
to mute the conference call.
, , or the Send soft key.
or to select the desired party: