To Configure Auto Redial Via Phone User Interface; To Use Auto Redial - Yealink SIP-T42G User Manual

3. Press
4. Press the Save soft key to accept the change or the Back soft key to cancel.
The icon appears on the LCD screen.
Auto answer is configurable via web user interface at the path Account->Basic.
Note
Auto answer is only applicable when there is no other call in progress on the phone.
You can enable auto redial to redial the phone number automatically when the called
party is busy. You can also configure the times settings for auto redial and the time to
wait between redial attempts.

To configure auto redial via phone user interface:

1. Press Menu->Features->Auto Redial.
2. Press
3. Enter the desired time (in seconds) in the Redial Interval field.
The default time interval is 10 seconds.
4. Enter the desired times in the Redial Times field.
The default value is 10.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Auto redial is configurable via web user interface at the path Features->General
Information.

To use auto redial:

When the called party is busy, the LCD screen prompts the following:
or , or the Switch soft key to select Enable from the Status field.
or , or the Switch soft key to select Enable from the Auto Redial field.
Basic Call Features
73