To Enable Live Dialpad Via Web User Interface - Yealink SIP-T42G User Manual

2. Enter the emergency number in the Emergency field.
For multiple emergency numbers, enter a comma between every two numbers. The
default emergency numbers are 110, 911 and 120.
3. Click Confirm to accept the change.
Note Emergency number is configurable via web user interface only.
You can enable live dialpad on the SIP-T42G IP phone, which enables the IP phone to
automatically dial out the phone number without pressing any other key. You can also
configure a delay, where the phone will dial out the phone number automatically after
the specified period of time.

To enable live dialpad via web user interface:

1. Click on Settings->Preference.
2. Select Enabled from the pull-down list of Live Dialpad.
Customizing Your Phone
65