Ending Calls; Redialing Numbers; Recent Call In Dialing; To Enable Recent Call In Dialing Via Web User Interface - Yealink SIP-T42G User Manual

Press
-
Press
The incoming call is answered and the original call is placed on hold.
To end a call:
Do one of the following:
If you are using the handset, press the Cancel soft key or hang up the handset.
-
- If you are using the headset, press the Cancel soft key.
If you are using the speakerphone, press
-
Note
To end a call placed on hold, you can press the Cancel soft key to end the call directly, or
press the Resume soft key to resume the call before ending it.
To redial the last dialed number from your phone:
1. Press
A call to your last dialed number is attempted.
To redial a previously dialed number from your phone:
1. Press
2. Press
press
To view the placed calls list when the phone is in the pre-dialing interface, you should
enable recent call in dialing in advance.

To enable recent call in dialing via web user interface:

1. Click on Directory->Setting.
to access the new call.
or the Answer soft key.
twice.
when the phone is idle.
or to select the desired entry from the placed calls list, and then
or the Send soft key.
Basic Call Features
or the Cancel soft key.
71