Sending Rtp Stream; To Configure A Multicast Paging Key Via Phone User Interface; To Configure A Default Codec For Multicast Paging Via Web User Interface - Yealink SIP-T42G User Manual

To configure a multicast paging key via phone user interface:

1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
4. Press or , or the Switch soft key to select Multicast Paging from the Key
Type field.
5. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
6. Enter the multicast IP address and port number (e.g., 224.5.6.20:10008) in the Value
field.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
7. Press the Save soft key to accept the change or the Back soft key to cancel.
Multicast paging key is configurable via web user interface at the path DSSKey->Line
Key.
You can also configure the phone to use a default codec for sending multicast RTP
stream via web user interface.

To configure a default codec for multicast paging via web user interface:

1. Click on Features->General Information.
Advanced Phone Features
105