Voice Mail; Messages; To Configure Voice Mail Access Codes Via Phone User Interface; To Listen To Voice Mails - Yealink SIP-T42G User Manual

You can leave voice mails for someone else on the SIP-T42G IP phone. You can also listen
to the voice mails stored in a centralized location. When receiving a new voice mail, the
phone will play a warning tone, and the power indicator LED will slow flash red. The
LCD screen will display a prompt message and appear an icon.
Note
Voice mail is not available on all servers. Contact your system administrator for more
information.
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to
answer the call. Follow the voice prompt from the system server to leave a voice mail,
and then hang up.

To configure voice mail access codes via phone user interface:

1. Press Menu->Messages->Voice Mail->Set Voice Mail.
2. Press the navigation keys to highlight the account which you want to set.
3. Press the 123 soft key to select the proper input mode and then enter the voice mail
access code (e.g., *88).
4. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
Voice mail access code must be predefined on the system server. Contact your system
administrator for the more information.

To listen to voice mails:

1. When the phone user interface prompts receiving new voice mails and the power
indicator LED slow flashes red, press
voice mail access code.
Advanced Phone Features
or the Connect soft key to dial out the
111