Develop ineo+35 User Manual page 61

[Paper Tray Settings]
[Auto Tray Switch]
[Enable ATS/APS]
[Tray 1]
[Tray 2]
[Tray 3]
[Tray 4]
[ACS Level]
[User Settings]
Specify paper tray settings.
Settings [ON] / [OFF]
Select whether or not a paper tray loaded with
paper of the same size is selected automati-
cally when a paper tray that was selected man-
ually becomes empty while printing copies.
Specify the paper trays that are selected when
the paper tray is automatically changed.
[Tray 3] and [Tray 4] do not appear if the
optional lower feeder units have not
been installed.
Settings [ON] / [OFF]
Select whether or not [Tray 1] can be selected
with the automatic tray-switching feature.
Settings [ON] / [OFF]
Select whether or not [Tray 2] can be selected
with the automatic tray-switching feature.
Settings [ON] / [OFF]
Select whether or not [Tray 3] can be selected
with the automatic tray-switching feature.
Settings [ON] / [OFF]
Select whether or not [Tray 4] can be selected
with the automatic tray-switching feature.
Settings 0 to 4 (Default: 2)
Adjust the level for detecting whether a docu-
ment is in color or in black and white when the
[Auto] Color setting is selected.Set to [0] or [1]
for a tendency toward black and white, or set to
[3] or [4] for a tendency toward color.
3-13