Specifying Destinations; Selecting From Registered Destinations; Selecting From The Favorites List; Selecting With An Index Search - Develop ineo+35 User Manual

Specifying destinations

Use any of the following methods to specify destinations.
"Selecting from registered destinations" on page 10-26
"Directly typing in the address" on page 10-28
"Selecting from the log" on page 10-31

Selecting from registered destinations

An address book destination or group destination can be selected from those
previously registered on the machine.
In order to select a registered destination, address book destinations
and group destinations must first be registered on the machine. For
details, refer to "Registering destinations" on page 10-33.

Selecting from the Favorites list

When destinations are registered, they can be specified as [Favorites].
As a default, the [Favorites] destination list appears when the initial Scan to
E-mail mode screen is displayed.
Select a destination from the list. To specify multiple destinations for a broad-
cast transmission, specify all destinations where the data is to be sent.
The setting for the Favorites list can be specified for a destination
when it is registered. For details, refer to "Registering an address book
destination" on page 10-34.

Selecting with an index search

Destinations can be selected by searching for the index characters specified
when each destination was registered.
1
In the initial Scan to E-mail mode screen, press
2
Press the desired index tab to search for destinations.
– If the desired index tab is not displayed, press [
desired tab appears.
– To select a group destination, press [
Address] on the rightmost end.
3
Select the destination, and then press [OK].
To specify multiple destinations, specify all destinations where the
data is to be sent.
10-14
.
] or [
], and then press [Group
Specifying destinations
] until the