[Original Mode]- [Original Direction]; [Original Mode]- [Orig. Binding Position] - Develop ineo+35 User Manual

[Original Mode]- [Original Direction]

Specify the orientation of the document.
Item
[Top]
[Bottom]
[Left]
[Right]

[Original Mode]- [Orig. Binding Position]

Specify the binding position when scanning a double-sided document using
the ADF. The orientation of the back sides of the pages differs depending on
whether the double-sided document will be bound at the top or at the left.
Item
[Left Bind]
[Top Bind]
[Auto]
10-6
Description
Select this setting when the document is loaded
with its top edge at the top.
Select this setting when the document is loaded
with its top edge at the bottom.
Select this setting when the document is loaded
with its top edge at the left (at the right when
placed on the original glass).
Select this setting when the document is loaded
with its top edge at the right (at the left when
placed on the original glass).
Description
Select this setting to specify a binding position at
the left.
Select this setting to specify a binding position at
the top.
Select this setting to automatically specify the
binding position.
If the document length is 297 mm (11.69 inches)
or less, a binding position along the long side of
the paper is selected.
If the document length is more than 297 mm
(11.69 inches), a binding position along the short
side of the paper is selected.
Performing Scan to E-mail mode operations