Conditions Of The Password Rules; Enhanced Security Settings; Required Settings - Develop ineo+35 User Manual

Conditions of the password rules

– Specify a password of 8 or more digits.
– Uppercase and lowercase letters are differentiated.
– Half-width symbols are used. The use of symbols such as the quota-
tion mark ("), plus sign (+) and spaces are limited with some settings.
– A password that consists of a repetition of the same character cannot
be specified.
– When changing the password, the same password as that before it is
changed cannot be specified.

Enhanced security settings

If settings have been specified that are incompatible with the enhanced secu-
rity settings, the enhanced security settings cannot be applied.
The settings that must be specified or are forcibly set cannot be changed
after the enhanced security settings have been applied.

Required settings

The following settings must first be specified in order to apply the enhanced
security settings.
Administrator mode parameters
[Security Settings] - [Administrator
Password]
[Security] tab in Web Connection -
[Authentication] - [General Settings] -
[User Authentication]
[Security] tab in Web Connection -
[PKI Settings] - [Device Certificate]
[Network] tab in Web Connection -
[SNMP Settings] - [SNMP v3 Set-
tings] - [auth-password]
[SSL] in Web Connection
[S/MIME] in Web Connection
3-74
Required settings
Specify a password that meets the
conditions of the password rules.
Select [Device] or [External Server].
Register a self-signed certificate in
order to perform SSL communica-
tions.
Specify passwords for [auth-pass-
word] and [priv-password] that meet
the conditions of the password rules.
Select [AES-256] or [AES-256,
3DES-168].
Select [3DES], [AES-128], [AES-192]
or [AES-256].
[Admin Settings]