Registering An Address Book Destination; Registering An Address Book Destination (E-Mail Transmission) - Develop ineo+35 User Manual

Registering an address book destination

The procedure for registering an address book destination for scan data is
described below.
E-mail address book destinations can be registered from the control panel of
this machine or from Web Connection. The following procedure describes
how to register from the control panel of this machine.
For details on registering from Web Connection, refer to the [Refer-
ence Guide].
FTP, SMB, and WebDAV destinations can be registered only from the
Web Connection. For details on registering from Web Connection,
refer to the [Reference Guide].
For details on specifying an address book destination to send scan
data, refer to "Selecting from registered destinations" on page 10-26.
If [Admin Settings] - [Security Settings] - [Security Details] - [Manual
Destination Input] is set to [Restrict], a destination cannot be regis-
tered from the control panel.
Registering an address book destination (E-mail
transmission)
1
Press the [Utility/Counter] key.
2
Press [Address Registration].
3
Press [E-mail].
4
Press [New].
– To view the information registered for a destination, select the regis-
tered destination, and then press [Details]. To delete the destination,
press [Delete] in the [Details] screen.
5
Enter the information for the destination, and then press [OK].
Item
[Name]
[E-mail address]
10-34
Description
Type in the registration name for the address
book destination. (up to 72 bytes)
Type in the E-mail address of the recipient. (up
to 320 characters)
Registering destinations