Selecting From The Favorites List; Selecting With An Index Search; Selecting By Searching For A Destination Type Or Name - Develop ineo+35 User Manual

Selecting from the Favorites list

When destinations are registered, they can be specified as [Favorites].
As a default, the [Favorites] destination list appears when the initial Scan to
Folder mode screen is displayed.
Select a destination from the list. To specify multiple destinations for a broad-
cast transmission, specify all destinations where the data is to be sent.
The setting for the Favorites list can be specified for a destination
when it is registered. For details, refer to "Registering an address book
destination" on page 10-34.

Selecting with an index search

Destinations can be selected by searching for the index characters specified
when each destination was registered.
1
In the initial Scan to Folder mode screen, press
2
Press the desired index tab to search for destinations.
– If the desired index tab is not displayed, press [
desired tab appears.
– To select a group destination, press [
Address] on the rightmost end.
3
Select the destination, and then press [OK].
– To specify multiple destinations, specify all destinations where the
data is to be sent.

Selecting by searching for a destination type or name

Destinations can be selected by searching for their type or name.
1
In the initial Scan to Folder mode screen, press
2
Press [Search].
3
Select the method to search for destinations.
– [Type]: Select the destination type ("FTP", "SMB", "WebDAV", etc.).
– [Name]: Directly enter the name of the destination to be searched for.
Type in the name to be searched for, and then press [OK] to display a
list of the search results.
4
Select the destination, and then press [OK].
– To specify multiple destinations, select all destinations where the data
is to be sent.
5
Press [OK].
Specifying destinations
.
] or [
], and then press [Group
.
] until the
10-27