[Separate Scan]; Scanning The Document In Separate Batches - Develop ineo+35 User Manual

Using the keypad, the number of copies can be changed.
To print another proof copy, press [Proof Copy].
To change the settings, press [Cancel], and then perform steps 2
through 8.
9
Press [Print].
The remaining number of copies is printed.

[Separate Scan]

The scan operation can be divided into several sessions, for example, when
all pages of a document cannot be loaded into the ADF, and then the scanned
pages can be treated as a single copy job. In addition, the scanning location
can be switched between the original glass and the ADF during the scanning
operation.
Item
[ON]
[OFF]

Scanning the document in separate batches

Do not load more pages into the ADF than the maximum number of
pages allowed, otherwise a document misfeed or damage to the docu-
ment may occur.
When sorting or making double-sided or combined copies using the
original glass, instead of using the Separate Scan operation, the docu-
ment can be scanned as a multiple-page document.
[Separate Scan]
Description
Select this setting to perform a Separate Scan
operation.
Select this setting to not perform a Separate Scan
operation.
7-11