Foot Control; Led Sewing Light - Bernina 820 Owner's Manual

foot control

B
a

LeD Sewing Light

Sewing Speed
► sewing speed is controlled by pressure on the foot
control
raise or Lower the needle
► entire foot rests comfortably on Foot Pedal
► tap the Foot Control with your heel to raise or lower the
needle
cable tidy
► wind the cable around the reel
► insert the cable end (plug) into
When sewing
► unwind the cable to the desired length and slip into
c
or
c
The LED sewing light illuminates the sewing area with no
shadows and has a very long service life.
032298.53.04_1204_B820_EN
a
(uSa/canada only):
use only foot controller type LV1 or Wfc1
with sewing computer model 820.
a defective sewing light must only be
replaced by a technician.
take the sewing computer to your
BernIna dealer.
B
13