Double/Triple Needle - Bernina 820 Owner's Manual

Double/triple needle

a
a
032298.53.04_1204_B820_EN
Double needle
► touch the «Security Program» icon
► touch the appropriate needle icon (double needle) in the
Security Program screen
► place a thread spool on the center spool pin and one on
the rear spool pin and thread the corresponding guides
on the telescopic rod
► insert the two threads together into the threading slit,
guiding the thread of the rear spool pin behind the
a
thread-tension disc while guiding the thread of the
center spool pin in front of the tension disc a. Then
guide the two threads through the thread guide at the
needle clamp
► touch the icon «Manual Threading» on the threading
animation screen. Next touch the illuminated automatic
threading button
► using the manual threader in your accessory kit,
manually thread the left needle and then the right
needle
triple needle
► in the Security Program select triple needle
► place a thread spool on each spool pin and thread the
respective guides on the telescopic rod
► thread as usual, guiding the thread from the rear and
center spool pin in the threading slit to the rear of
a
thread tension disc and the thread from the front
spool pin in front of the tension disc
changing the thread
► cut the spool thread before the pre-tension and pull out
of the sewing computer to front near the needle
a
19