Sewing
confirm Selection
►
activate or confirm change/selection
Leave active Screen
►
close application
►
return to the last active screen
Long stitch
►
the sewing computer sews every second
stitch (max. stitch length 12mm)
►
can be used for practical and decorative
stitches
►
exception: buttonholes
mirror Image (up/Down)
►
the sewing computer sews the selected stitch
pattern in vertical Mirror Image (up/down – de-
termined by the sewing direction)
mirror Image (Left/right)
►
the sewing computer sews the selected stitch
pattern in horizontally Mirror Image (left/right
– determined by the sewing direction)
Stitch counter
►
when the desired length is achieved (e.g. first
buttonhole bead or straight stitch), touch the
Quick Reverse Button
►
the display changes to «auto» (for the
buttonhole, only after length of second bead is
determined by pressing the Quick Reverse
Button)
►
the stitch pattern selected is temporarily
programmed
pattern extend 2-5x
►
touch the icon one or more times, the
numbers 2-5 appear
►
stitch integrity is maintained
►
stitch pattern is extended
pattern begin
►
the needle moves to the beginning of a stitch
pattern or program
Buttonhole Length Direct entry
►
enter buttonhole length via stitch width or
stitch length knob. Number in mm
pattern repeat 1-9x
►
touch the icon several times, the numbers 1-9
appear
►
number 1: the sewing computer stops at the
end of an individual stitch or stitch combina-
tion
►
numbers 2-9: the sewing computer stops at
the end of a stitch or stitch combination after
the number of repeats selected
34
Active functions are highlighted in blue, inactive functions are gray.
The multifunction keys are switched off by keeping them pressed a few seconds.
032298.53.04_1204_B820_EN
manual Buttonhole
►
special screen appears
►
sew manual buttonhole in 5 or 7 steps
(depending on buttonhole type)
programming Buttonhole Length
►
icon is automatically highlighted in blue when
a buttonhole is selected
►
set the buttonhole length with the Quick
Reverse Button or directly program the length
displayed by pressing the icon
►
function turns inactive after programming the
length
►
if a new length is to be programmed, touch
icon again
feed-dog position
►
touch the icon «lower feed-dog» = feed-dog is
lowered
►
the lowered feed-dog is shown by the red,
flashing symbol
Buttonhole Slit Width
►
set the buttonhole slit width to between 0.1mm
and 2.0mm using the Stitch Width or the Stitch
Length Knob
►
the standard width is 0.6mm
Securing
►
touch icon before sewing starts = single
pattern is secured at the start with 4 securing
stitches
►
touch icon during sewing individual stitches =
individual stitches will be secured at the end,
the sewing computer stops
►
program the function within a pattern combina-
tion = each individual pattern of the combina-
tion can be secured at the start or the end
multi-function button
►
only active in combination mode
►
when selected, a screen with further functions
appears
Lettering size in alphabets
►
when alphabet is selected, the lettering size is
9mm
►
when the function is selected, «2» is activated
and the alphabet is sewn with 6mm lettering
size