Preparation; Sewing Computer; Power Switch/Power Cable; Battery - Bernina 820 Owner's Manual

Battery

power Switch/power cable

e
D
c
(uSa/canada only):
the sewing computer has a polarized
plug (one blade wider than the other). to
reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician
to install the proper outlet. Do not modify
the plug in any way!

free-Hand-System (fHS) presser foot Lifter

12
a B
032298.53.04_1204_B820_EN
Please remove the protective sticker of the battery
before taking the sewing computer in use.
a power Switch
The sewing computer is switched on («I») and off («0»)
with the power switch.
I the sewing computer is switched on
0 the sewing computer is switched off
B power connection
c foot control connection
D pc connection
e uSB stick connection
If the sewing computer is kept in a cold room,
place it in a warm room for 1 hour before use.
The FHS is used to raise and lower the Presser Foot.
attaching the free Hand System
► insert into the opening; you should be able to operate
the FHS with your knee in your normal sitting position
raising and Lowering the presser foot
► with knee push FHS to the right
► the presser foot is raised and the feed-dog is lowered
simultaneously. Tension is released
► the feed-dog is raised as soon as the first stitch is sewn
Your dealer can adjust the FHS if necessary.