BernIna Dual feed Description
only use «D» presser feet with cut-out at
the center back.
If an incorrect presser foot is attached, the
sewing computer will not start with the
dual feed engaged. an error message will
appear.
With the BERNINA Dual Feed the top and bottom layer of
fabric are fed simultaneously, the even feeding enabling
perfect matching of striped and checkered patterns.
presser feet Selection
►
Reverse pattern foot 1D (standard accessory)
►
Zipper foot 4D (standard accessory)
More «D» presser feet are listed in the enclosed accesso-
ries catalogue.
Switching on BernIna Dual feed
►
raise the presser foot
►
press dual feed down until it engages
Switching off BernIna Dual feed
►
raise the presser foot
►
hold dual feed on black holder with two fingers, pull it
down, then push backward, slowly letting it slide upward
In order to ensure full functionality of the
sewing computer, it is essential to
aLWayS lower the presser foot first thing
after switching the dual feed on or off.
032298.53.04_1204_B820_EN
113