Determining The Buttonhole Slit Width; Determining The Buttonhole Length Via The Buttonhole Foot With Slide No. 3A; Determining The Buttonhole Length With Buttonhole Foot No. 3C (Optional Accessory) - Bernina 770 QE Manual

Special edition
Hide thumbs Also See for 770 QE:
Table of Contents

Advertisement

9.7 Determining the buttonhole slit width

The width of the buttonhole slit can be adjusted between 0.1 – 2.0 mm before sewing.
> Touch the icon «Buttonholes».
> Select the buttonhole.
> Touch the icon «i»-Dialog.
> Touch the icon «Buttonhole slit width».
0.6
> Turn the «Upper Multifunctional knob» or the «Lower Multifunctional knob» to adjust the buttonhole slit
width as desired.
9.8 Determining the buttonhole length via the Buttonhole foot with
slide No. 3A
The button can be placed in the yellow circle in the left section of the display. The yellow circle can be
enlarged or downsized by turning the «Upper/Lower Mulitfunction knobs» and the diameter of the
button can be determined in this way.
Additionally to the diameter of the button, 2 mm are added automatically for the buttonhole length. If the
diameter of the button is 14 mm, the buttonhole length is calculated 16 mm.
Prerequisite:
The Buttonhole foot with slide No. 3A is attached.
> Touch the icon «Buttonholes».
> Select the buttonhole.
> Touch the icon «i»-Dialog.
> Touch the icon «Adjust the buttonhole length».
16.0
> Turn the «Upper Multifunctional knob» or the «Lower Multifunctional knob» to adjust the buttonhole
length.
9.9 Determining the buttonhole length with Buttonhole foot No. 3C
(optional accessory)
With the Buttonhole foot No. 3C (optional accessory) the buttonhole length must be determined via the
stitch counter function. The stitch counter function is suitable for all types of buttonholes. The left
buttonhole bead is sewn forward, the right buttonhole bead is sewn in reverse. If alterations of the balance
are made, the stitch counter function has to be saved for every buttonhole separately.
Prerequisite:
The Buttonhole foot No. 3C (optional accessory) is attached.
> Touch the icon «Buttonholes».
> Select the buttonhole.
Buttonholes
119

Advertisement

Table of Contents
loading

This manual is also suitable for:

740

Table of Contents