Comtech EF Data KPA-020IN Installation And Operation Manual page 81

Ku-Band Solid-State Power Amplifier
Remote Control
Table 6-4. Commands Supported by Virtual Addressing Mode
Commands
Retrieve Equipment Type
Set Amplifier On/Off
Mute/Unmute
Set Attenuation
Select Auto Fault Recovery
Retrieve Configuration Status
Retrieve Maintenance Status
Retrieve FET Status
Retrieve Utility Status
Retrieve Alarm Status
Summary Alarm Status
Terminal Status Change
Packed Configuration Status
Packed Maintenance Status
Packed FET Status
Packed Utility Status
Packed Alarm Status
Display
Utility Commands
<DEV/RET_'cr'
Configuration Commands
<DEV/AMP_xxx'cr'
<DEV/MUT_xxx'cr'
<DEV/ATT_xx.xx'cr'
<DEV/AFR_xxx'cr'
Status Commands
<DEV/RCS_'cr'
<DEV/RMS_'cr'
<DEV/RFS_'cr'
<DEV/RUS_'cr'
<DEV/RAS_'cr'
<DEV/SAS_'cr'
<DEV/TSC_'cr'
<DEV/PACRCS_'cr'
<DEV/PACRMS_'cr'
<DEV/PACRFS_'cr'
<DEV/PACRUS_'cr'
<DEV/PACRAS_'cr'
6-22
Revision 0
MN/KPA.IOM
Reference
6.9.1
6.9.2
6.9.2
6.9.2
6.9.2
6.9.4
6.9.4
6.9.4
6.9.4
6.9.4
6.9.4
6.9.4
6.9.4
6.9.4
6.9.4
6.9.4
6.9.4