Ku-Band Solid-State Power Amplifier
Remote Control
6.8.2
End Of Message
End of message strings were devised in such a way that an orderly screen presentation
would result when KPAs are controlled by simple ASCII terminals.
6.8.2.1
Command Ending
The end of message for a command is a carriage return. For this document 'cr' is used for
the carriage return.
6.8.2.2
Response Ending
End of message for a response is a carriage return, line feed and a bracket: 'cr''lf'].
For Example:
<DEV/COM'cr'
For Example:
>DEV/COM'cr''lf']
6-8
Revision 0
MN/KPA.IOM
Need help?
Do you have a question about the KPA-020IN and is the answer not in the manual?
Questions and answers