Comtech EF Data KPA-020IN Installation And Operation Manual page 44

Ku-Band Solid-State Power Amplifier
Operation
SELECT: CONFIGURATION MENU: FAULT RECOVERY
Fault Recovery is MANUAL or AUTO. The default is AUTO.
SELECT: CONFIGURATION MENU: REDUNDANCY
CONFIGURATION
This menu window provides indication of the operating mode (i.e. standalone or
redundancy).
•
•
•
•
SELECT: CONFIGURATION MENU: REDUNDANCY
CONFIGURATION: PRIORITY
Provides selection of priority KPA in 1:2 redundancy systems.
Always 1 in 1:1 redundancy systems.
SELECT: CONFIGURATION MENU: REDUNDANCY
CONFIGURATION: OPERATING MODE
Provides selection of either AUTO or MANUAL operating Mode in redundancy
systems.
Note: Window not displayed when Redundancy is Off.
-FAULT-RECOVERY:-MANUAL-
------------------------
-REDUNDANCY-CONFIG?-ON—
--SSP-#-BU—1:02—P=1--
Priority SSPA
Operating Mode
Gain OFFSET/Forced Backup
Active Backup
-----PRIORITY-SSPA:-----
----------#1------------
----OPERATING-MODE:-----
---------MANUAL---------
4-9
Revision 0
MN/KPA.IOM