Installation And Operation; Mounting The Units - Extron electronics DTP HDMI 230 User Manual

Installation and
Operation
This section describes the installation and the operation of the DTP HDMI 230 Tx/Rx
Extender, including:
•
•
•

Mounting the Units

Mounting instructions and the can be found in
page 11.
ATTENTION:
Mounting the Units
Connections
Operation
• Installation and service must be performed by authorized personnel only.
• Avoid ground potential differences between the transmitter and receiver installation
sites, which can lead to equipment damage or a missing or unstable picture. If
a potential difference cannot be avoided, remove the ground connection between
the units and locally power both units (see
page 12). In this configuration, the DTP HDMI 230 cannot extend analog audio
and each unit requires a local power supply.
DTP HDMI 230 Tx/Rx Transmitter and Receiver • Installation and Operation
Mounting the Transmitter or Receiver
Disconnecting the Ground
on
on
3