Table 33 Advanced> Nat Configuration > Port Forwarding; Table 34 Advanced > Nat Configuration > Port Forwarding - ZyXEL Communications MAX-306M1 User Manual

Chapter 10 The NAT Configuration Screens
The following table describes the icons in this screen.
Table 33 Advanced> NAT Configuration > Port Forwarding
ICON
The following table describes the labels in this screen.
Table 34 ADVANCED > NAT Configuration > Port Forwarding
LABEL
Default Server Setup
Default Server
Port Forwarding
#
Active
Name
Start Port
End Port
Server IP
Address
Action
Apply
Reset
112
DESCRIPTION
Edit
Click to edit this item.
Delete
Click to delete this item.
DESCRIPTION
Enter the IP address of the server to which the WiMAX Modem should
forward packets for ports that are not specified in the Port Forwarding
section below or in the TOOLS > Remote MGMT screens. Enter
0.0.0.0 if you want the WiMAX Modem to discard these packets instead.
The number of the item in this list.
Select this to enable this rule. Clear this to disable this rule.
This field displays the name of the rule. It does not have to be unique.
This field displays the beginning of the range of port numbers
forwarded by this rule.
This field displays the end of the range of port numbers forwarded by
this rule. If it is the same as the Start Port, only one port number is
forwarded.
This field displays the IP address of the server to which packet for the
selected port(s) are forwarded.
Click the Edit icon to set up a port forwarding rule or alter the
configuration of an existing port forwarding rule.
Click the Delete icon to remove an existing port forwarding rule.
Click to save your changes.
Click to restore your previously saved settings.
User's Guide