Configuration; Figure 54 Advanced > System Configuration > Configuration; Table 41 Advanced > System Configuration > Configuration - ZyXEL Communications MAX-306M1 User Manual

Chapter 11 The System Configuration Screens

11.5 Configuration

Click ADVANCED > System Configuration > Configuration to back up or
restore the configuration of the WiMAX Modem. You can also use this screen to
reset the WiMAX Modem to the factory default settings.
Figure 54 ADVANCED > System Configuration > Configuration
The following table describes the labels in this screen.
Table 41 ADVANCED > System Configuration > Configuration
LABEL
Backup Configuration
Backup
Restore Configuration
File Path
Browse
Upload
Back to Factory Defaults
Reset
126
DESCRIPTION
Click this to save the WiMAX Modem's current configuration to a file on
your computer. Once your device is configured and functioning
properly, it is highly recommended that you back up your configuration
file before making configuration changes. The backup configuration file
is useful if you need to return to your previous settings.
Enter the location of the file you want to upload, or click Browse... to
find it.
Click this to find the file you want to upload.
Click this to restore the selected configuration file.
Note: Do not turn off the device while configuration file upload is in
progress.
Click this to clear all user-entered configuration information and return
the WiMAX Modem to its factory defaults. There is no warning screen.
User's Guide