The Telnet Screen - ZyXEL Communications NWA-3160 User Manual

Chapter 16 Remote Management Screens
System Timeout
There is a default system management idle timeout of five minutes (three
hundred seconds). The NWA automatically logs you out if the management
session remains idle for longer than this timeout period. The management session
does not time out when a statistics screen is polling. You can change the timeout
period in the SYSTEM screen.

16.2 The Telnet Screen

Use this screen to configure your NWA for remote Telnet access. You can use
Telnet to access the NWA's Command Line Interface (CLS).
Click REMOTE MGNT > TELNET. The following screen displays.
Figure 116 Remote Management: Telnet
The following table describes the labels in this screen.
Table 53 Remote Management: Telnet
LABEL
TELNET
Server Port
Server
Access
186
You can change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Select the interface(s) through which a computer may access the NWA
using Telnet.
DESCRIPTION
NWA-3160 Series User's Guide