Troubleshooting; Power, Hardware Connections, And Leds - ZyXEL Communications MAX-306M1 User Manual

C
H A P T E R
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories:
•

Power, Hardware Connections, and LEDs

• WiMAX Modem Access and Login
• Internet Access
• Phone Calls and VoIP
• Reset the WiMAX Modem to Its Factory Defaults
22.1 Power, Hardware Connections, and LEDs
The WiMAX Modem does not turn on. None of the LEDs turn on.
Make sure you are using the power adapter or cord included with the WiMAX
1
Modem.
Make sure the power adapter or cord is connected to the WiMAX Modem and
2
plugged in to an appropriate power source. Make sure the power source is turned
on.
Disconnect and re-connect the power adapter or cord to the WiMAX Modem.
3
If the problem continues, contact the vendor.
4
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
page 33 for more information.
User's Guide

Troubleshooting

22
Section 1.2.1 on
249