Www; Figure 87 Tools > Remote Management > Www; Table 71 Tools > Remote Management > Www - ZyXEL Communications MAX-306M1 User Manual

SNMP
Simple Network Management Protocol (SNMP) is a protocol used for exchanging
management information between network devices. SNMP is a member of the
TCP/IP protocol suite. Your WiMAX Modem supports SNMP agent functionality,
which allows a manager station to manage and monitor the WiMAX Modem
through the network. The WiMAX Modem supports SNMP version one (SNMPv1)
and version two (SNMPv2). The next figure illustrates an SNMP management
operation.
Note: SNMP is only available if TCP/IP is configured.

18.2 WWW

Click TOOLS > Remote Management > WWW to control HTTP access to your
WiMAX Modem.
Figure 87 TOOLS > Remote Management > WWW
The following table describes the labels in this screen.
Table 71 TOOLS > Remote Management > WWW
LABEL
Server Port
Server Access
Secured Client
IP Address
Apply
Reset
User's Guide
DESCRIPTION
Enter the port number this service can use to access the WiMAX
Modem. The computer must use the same port number.
Select the interface(s) through which a computer may access the
WiMAX Modem using this service.
Select All to allow any computer to access the WiMAX Modem using this
service.
Select Selected to only allow the computer with the IP address that
you specify to access the WiMAX Modem using this service.
Click to save your changes.
Click to restore your previously saved settings.
Chapter 18 The Remote Management Screens
205