ZyXEL Communications MAX-306M1 User Manual page 238

Chapter 21 The Status Screen
Table 103 Status (continued)
LABEL
Memory Usage
IVR Usage
Interface Status
Interface
Status
Rate
Summary
Packet
Statistics
WiMAX Site
Information
DHCP Table
VoIP Statistics
WiMAX Profile
VoIP Status
Account
238
DESCRIPTION
This field displays what percentage of the WiMAX Modem's memory is
currently used. The higher the memory usage, the more likely the
WiMAX Modem is to slow down. Some memory is required just to start
the WiMAX Modem and to run the web configurator. You can reduce the
memory usage by disabling some services (see CPU Usage); by
reducing the amount of memory allocated to NAT and firewall rules (you
may have to reduce the number of NAT rules or firewall rules to do so);
or by deleting rules in functions such as incoming call policies, speed
dial entries, and static routes.
This field displays what percentage of the WiMAX Modem's IVR memory
is currently used. IVR (Interactive Voice Response) refers to the
customizable ring tone and on-hold music you set.
This column displays each interface of the WiMAX Modem.
This field indicates whether or not the WiMAX Modem is using the
interface.
For the WAN interface, this field displays Up when the WiMAX Modem is
connected to a WiMAX network, and Down when the WiMAX Modem is
not connected to a WiMAX network.
For the LAN interface, this field displays Up when the WiMAX Modem is
using the interface and Down when the WiMAX Modem is not using the
interface.
For the LAN ports this displays the port speed and duplex setting.
For the WAN interface, it displays the downstream and upstream
transmission rate or N/A if the WiMAX Modem is not connected to a
base station.
For the WLAN interface, it displays the transmission rate when WLAN is
enabled or N/A when WLAN is disabled.
Click this link to view port status and packet specific statistics.
Click this link to view details of the radio frequencies used by the
WiMAX Modem to connect to a base station.
Click this link to see details of computers to which the WiMAX Modem
has given an IP address.
Click this link to view statistics about your VoIP usage.
Click this link to view details of the current wireless security settings.
This column displays each SIP account in the WiMAX Modem.
User's Guide