How Do I Backup/Restore Configurations By Using Ftp Client Program Via Lan; Why Can't I Make Telnet To Prestige From Wan; What Should I Do If I Forget The System Password; What Is Sua? When Should I Use Sua - ZyXEL Communications Prestige 2602RL-D3A Support Notes

Table of Contents

e. Press "Save file" and browse to where you want the file be save.

f. Press "Save" button.

How do I backup/restore configurations by using FTP client program via LAN?

a. Use the a FTP client program in your PC (such as cuteftp, wsftp client) to login to your Prestige.

b. To backup the configurations, use FTP client program to get file 'rom-0' from the Prestige.

c. To restore the configurations, use the FTP client program to put your configuration in file ROM-0 in the

Prestige.

There are three possible reasons that Telnet from WAN is blocked.

a. You have not enable Telnet service on WAN interface in Menu 24.11.

b. Telnet service is enabled but your host IP is not the secured host entered in Menu 24.11. In this case, the

error message 'Client IP is not allowed!' will appear on the Telnet screen.

c. The default filter rule 3 (Telnet_FTP_WAN) is applied in the Input Protocol field in menu 11.5.

In case you forget the system password. You can reset the unit back to factory default. You can reset the

unit by using a sharp pointed object such as a pen and press and hold down the "reset" button for 5 second or

until the power LED starts to blink than release. The unit is than reset back to factory default. The reset

button is located near by the power jack on the unit back panel.

Note: By reset the unit back to factory default you will lost all your previous settings.

SUA (Single User Account) is a unique feature supported by Prestige router which allows multiple people to

access Internet concurrently for the cost of a single user account.

When Prestige acting as SUA receives a packet from a local client destined for the outside Internet, it replaces

the source address in the IP packet header with its own address and the source port in the TCP or UDP header

with another value chosen out of a local pool. It then recomputed the appropriate header checksums and

forwards the packet to the Internet as if it is originated from Prestige using the IP address assigned by ISP.

When reply packets from the external Internet are received by Prestige, the original IP source address and

TCP/UDP source port numbers are written into the destination fields of the packet (since it is now moving in

Prestige 2602RL-D3A Support Notes

130

Table of Contents