ZyXEL Communications MAX-306M1 User Manual page 244

Chapter 21 The Status Screen
Table 107 VoIP Statistics
LABEL
Last Outgoing
Number
Call Statistics
Phone
Hook
Status
Codec
Peer Number
Duration
Tx Pkts
Rx Pkts
Tx B/s
Rx B/s
Poll Interval(s)
Set Interval
Stop
244
DESCRIPTION
This field displays the last number the SIP account called. It displays
N/A if the SIP account has never dialed a number.
This field displays the WiMAX Modem's phone port number.
This field indicates whether the phone is on the hook or off the hook.
On - The phone is hanging up or already hung up.
Off - The phone is dialing, calling, or connected.
This field displays the current state of the phone call.
N/A - There are no current VoIP calls, incoming calls or outgoing calls
being made.
DIAL - The callee's phone is ringing.
RING - The phone is ringing for an incoming VoIP call.
Process - There is a VoIP call in progress.
DISC - The callee's line is busy, the callee hung up or your phone was
left off the hook.
This field displays what voice codec is being used for a current VoIP call
through a phone port.
This field displays the SIP number of the party that is currently engaged
in a VoIP call through a phone port.
This field displays how long the current call has lasted.
This field displays the number of packets the WiMAX Modem has
transmitted in the current call.
This field displays the number of packets the WiMAX Modem has
received in the current call.
This field displays how quickly the WiMAX Modem has transmitted
packets in the current call. The rate is the average number of bytes
transmitted per second.
This field displays how quickly the WiMAX Modem has received packets
in the current call. The rate is the average number of bytes transmitted
per second.
Enter how often you want the WiMAX Modem to update this screen, and
click Set Interval.
Click this to make the WiMAX Modem update the screen based on the
amount of time you specified in Poll Interval.
Click this to make the WiMAX Modem stop updating the screen.
User's Guide