Table 91 Icmp Logs; Table 92 Ppp Logs; Table 93 Upnp Logs - ZyXEL Communications MAX-306M1 User Manual

Chapter 20 The Logs Screens
or type and code details, see
F

Table 91 ICMP Logs

LOG MESSAGE
Firewall default policy: ICMP
<Packet Direction>, <type:%d>,
<code:%d>
Firewall rule [NOT] match: ICMP
<Packet Direction>, <rule:%d>,
<type:%d>, <code:%d>
Triangle route packet forwarded:
ICMP
Packet without a NAT table entry
blocked: ICMP
Unsupported/out-of-order ICMP:
ICMP
Router reply ICMP packet: ICMP

Table 92 PPP Logs

LOG MESSAGE
ppp:LCP Starting
ppp:LCP Opening
ppp:CHAP Opening
ppp:IPCP
Starting
ppp:IPCP Opening
ppp:LCP Closing
ppp:IPCP Closing

Table 93 UPnP Logs

LOG MESSAGE
UPnP pass through Firewall
228
Table 97 on page
DESCRIPTION
ICMP access matched the default policy and was
blocked or forwarded according to the user's
setting.
ICMP access matched (or didn't match) a firewall
rule (denoted by its number) and was blocked or
forwarded according to the rule.
The firewall allowed a triangle route session to
pass through.
The router blocked a packet that didn't have a
corresponding NAT table entry.
The firewall does not support this kind of ICMP
packets or the ICMP packets are out of order.
The router sent an ICMP reply packet to the
sender.
DESCRIPTION
The PPP connection's Link Control Protocol stage has started.
The PPP connection's Link Control Protocol stage is opening.
The PPP connection's Challenge Handshake Authentication Protocol
stage is opening.
The PPP connection's Internet Protocol Control Protocol stage is
starting.
The PPP connection's Internet Protocol Control Protocol stage is
opening.
The PPP connection's Link Control Protocol stage is closing.
The PPP connection's Internet Protocol Control Protocol stage is
closing.
DESCRIPTION
UPnP packets can pass through the firewall.
231.
User's Guide