Motherboard Features; Processor; Memory; Onboard Sata - Supero SUPERSERVER 5015A-L User Manual

Table of Contents

Advertisement

S
S
UPER
ERVER 5015A-L/5015A-H User's Manual
1-2

Motherboard Features

At the heart of the SuperServer 5015A-L/5015A-H lies the X7SLA-L/X7SLA-H, a
single processor, low-power motherboard based upon Intel's 945GC chipset. Below
are the main features of the X7SLA-L/X7SLA-H.

Processor

The X7SLA-H supports one Intel® Atom™ 330 Dual-core 1.6 GHz processor while
the X7SLA-L supports one Intel® Atom™ 230 Single-core 1.6 GHz processor. The
processors are embedded into the motherboard.

Memory

The X7SLA-L/X7SLA-H has two 240-pin DIMM slots that can support up to 2 GB
of non-ECC DDR2-533/400 SDRAM.

Onboard SATA

A SATA controller is built in to the ICH7R portion of the chipset to provide support
for a four port, 3 Gb/sec Serial ATA subsystem.

PCI Expansion Slots

The X7SLA-L/X7SLA-H has one PCI-Express x8 slot, one PCI-Express x4 (in a x8
slot) and one 32-bit PCI slot.

Onboard Controllers/Ports

An onboard IDE controller supports two IDE devices. Onboard I/O backpanel ports
include one COM port, a VGA port, PS/2 mouse and keyboard ports, a Gb LAN port
and two USB ports. In additiona, the X7SLA-H features two Gb LAN ports and an
extra internal COM port (header).
Other Features
Other onboard features that promote system health include voltage monitors, a
chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors, virus protection and BIOS rescue.
1-2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superserver 5015a-h

Table of Contents